Lighting Installation
Ceiling Fan Installation in Celina, TX
Fan installation and replacement on a properly rated box — including rooms with no existing wiring and covered patios.
A ceiling fan takes real load off your AC in North Texas summers, but only if it's mounted on a box rated to hold it. Ceiling fans are heavier and produce more vibration than a light fixture, and a standard fixture box will eventually work loose, wobble, or fail. We install and replace ceiling fans across Celina, Prosper, Frisco, and McKinney on properly rated fan boxes, whether we're swapping an existing fan or adding one to a room that's never had one.
We also handle the trickier jobs: vaulted and high ceilings that need extended downrods, rooms with no existing ceiling wiring at all, and outdoor or patio-rated fans for covered porches. A fan that's the wrong size for the room, or mounted too close to the ceiling, won't move air effectively — we'll help you pick the right fan for the space if you haven't already bought one.
We'll take a look at the room, the ceiling height, and the existing wiring, then give you a free quote before any work starts.
What's included
- Fan-rated electrical box installation or verification
- Removal of old fixture or fan
- New fan mounting and balancing
- Downrod sizing for vaulted or high ceilings
- New circuit or wiring for rooms without existing fan wiring
- Wall control, remote, or smart switch setup
- Outdoor/damp-rated fan installation for covered patios
Replacing an existing fan or fixture
If you already have a ceiling fan or a light fixture in place, swapping it for a new fan is usually a straightforward visit — but we always check that the existing box is fan-rated before hanging anything. A lot of older homes have a standard fixture box where a previous owner or contractor added a fan without upgrading the box, which is a real safety issue over time. See our electrical repairs page if that check turns up wiring issues beyond the box itself.
Adding a fan where there's no existing wiring
Plenty of rooms — especially additions, converted spaces, or rooms that only ever had a switch for outlets — don't have any ceiling electrical box at all. In those cases we run a new circuit or extend an existing one, install a fan-rated box, and add the switch or wall control you want. This is a bigger job than a straight swap, but it's common, and we'll walk you through what's involved before we start. Our lighting installation hub covers combined fan-and-light fixture wiring if you're adding both.
High and vaulted ceilings
Fans on vaulted or two-story ceilings usually need a downrod — an extension pole that drops the fan to the correct height for effective airflow (roughly 8-9 feet off the floor is ideal). Mounting on a steep or high ceiling also takes different equipment than a flat 9-foot ceiling. We size the downrod to your ceiling pitch and bring the right equipment for the height rather than mounting flush against an angled ceiling, which hurts both looks and performance.
Outdoor and patio-rated fans
Fans for covered patios or porches need to be rated for outdoor or damp-location use — a standard indoor fan's motor and finish won't hold up to North Texas humidity and temperature swings. We install wet- or damp-rated fans appropriately for covered outdoor spaces, with weatherproof wiring and switching. ENERGY STAR publishes fan efficiency ratings that are useful if you're comparing models before you buy.
What it costs
Ceiling fan installation cost depends mainly on whether the room has existing fan-rated wiring, ceiling height and downrod needs, and whether you want a wall control, remote, or smart switch added. Swapping an existing fan on a standard ceiling is a much smaller job than adding a new circuit to a room with no wiring at all. We'll look at your specific room and give you a typical North Texas range — request a free quote for an exact number.
Ceiling Fans — FAQ
Can I just replace my old fan with a new one myself?
You can, but many homeowners aren't sure whether their existing box is rated to safely hold a fan's weight and vibration, which is the main safety concern. We check that as part of every fan installation.
Can you add a ceiling fan to a room that doesn't have one?
Yes, this is common in additions or rooms without existing ceiling wiring. We run a new circuit, install a fan-rated box, and add the switch or control you want.
How high should a ceiling fan be mounted?
For effective airflow, fan blades are generally best around 8 to 9 feet above the floor. On vaulted or high ceilings, we use a downrod sized to bring the fan down to that range.
Do outdoor ceiling fans need to be different from indoor fans?
Yes, fans installed on covered patios or porches need to be rated for outdoor or damp-location use so the motor and finish hold up to humidity and temperature changes. We install the correct rating for the location.
How long does a ceiling fan installation take?
A straightforward swap on existing fan-rated wiring is usually a single visit. Adding new wiring or a new circuit for a room without existing fan wiring takes longer, which we'll estimate during your free quote.
Ready for a straightforward, honest quote?
Licensed & insured, owner-operated, and 5.0★ across 186 reviews. No pressure — just a clear, free quote for your home.